Removable Court Poles and Net Kit

Surface Mounting Pole and Net Exclusively by All Sport Netting

Looking to install barrier posts without compromising on stability? Our Removable Court Pole and Net are the perfect solution for concrete floor surfaces (asphalt is possible please call to discuss). This removable system, can be used for barrier netting between courts and behind the baseline in the backcourt, sold as a set of two poles and 42″high x 20″ wide net. This is easy to set up and easy to store. Call to discuss full facility setup.

Key Features of the Poles

• Removable Design: Each 42″ pole includes a threaded male end that screws into a drop-in female anchor embedded in the concrete, making setup, removal, and maintenance fast and easy.
• Standard Fit: Sections come with 20’ net with two 42″ poles.
• Custom Set up: Need more coverage? We can customize layouts for 40’, 60’, 80’, or 100’ sections.

Specifications:

• Set of two poles
• Pole Material: 1-5/8″ black powder-coated steel
• Base Plate: Welded 6″ x 6″ steel plate with 1-1/2″ x 1/2″ threaded male end
• Includes: Removable top cap

Installation:

• For Concrete: Drill a hole in the ground, drop in the anchor and screw the post into place.
• For Asphalt: Call for installation instructions, as a sleeve is required.

Ket Features of the Net

A clean, professional barrier panel for pickleball and tennis—ideal for baselines and court dividers. Built from weather resistant knotted polyethylene with oxford cloth headbands and adjustable Velcro straps for fast, tidy installs on frames, cables, or posts up to 2″ OD.

Highlights

• Size: 20 ft (L) × 42 in (W) — 6,096 × 1,067 mm
• Mesh: 1-7/8″ (≈48 mm) square, knotted for shape retention
• Twine Gauge: 2.5–3.0 mm (PE)
• Color: Black, UV-stabilized
• Headbands: Heavy-duty oxford cloth (top/bottom) with integrated adjustable hook-and-loop straps for easy attachment and tensioning
• Material: Polyethylene—rot/mildew resistant, low water uptake; indoor/outdoor use
• Edges: Finished headbands top and bottom; pocket sleeves on both ends to fit posts/pipes up to 2″ OD

Strength & Durability

• Industry-typical break strength: ~228 lbf (1.01 kN) for 2.5–3.0 mm knotted PE in this mesh class.

Typical Uses

• Pickleball/tennis court barriers, baselines, and multi-sport dividers
• Indoor and outdoor general barrier/safety netting

Installation

• Attach using the included adjustable velcro straps to cables, fences, wood, or steel.
• For side edges, add clips or lacing every 4–6 in in high-traffic areas.
• Tension evenly—avoid “drum-tight” installs to preserve longevity.
• End-pocket setup: Slide the end pockets over posts spaced at 20 ft, snug the straps along the top/bottom headbands, and tie off/secure all four corners.